I am only using the ethernet adapter to connect to the network hence my configuration will look below. Since I am using a laptop, I have a wireless interface and an ethernet cable connected directly to the router. You must have admin access to click on the change settings.Īs soon as you click on Change settings, the VMnet0 interface appears on top. The Virtual network editor window will now pop up you won’t see VMnet0 until you click on Change settings. Go to the VMware workstation pro and click Edit–> Virtual Network editor. This is how you should connect to the bridge interface. If you are not getting an IP address, you have not configured the bridge interface correctly. In my case, I was getting an Ip address from my local network, so my connectivity was good. So it is, vital that you choose the right interface when you connect to the network. When you use the bridged adapter, the VMware workstation bridges the network between your local interface connected to the network and the VMnet0 adapter on the VMware workstation. Restore the VMware network to its default.Ĭonnect the VMware bridge interface in the right way.Try disabling the antivirus on your machine and test it.Fix the VMware bridged network not working.Connect the VMware bridge interface in the right way.Just out of curiosity, I tried accessing the internet by pinging google URL and Cloudflare DNS IP, and that didn’t work either.īasically, none of my guest machines works on the bridged networking on my Vmware workstation pro, And below is what I did to solve this issue. I can ping another host in the same network that’s weird, isn’t it? I am not blocking the ICMP traffic on the gateway, and it should work just fine, but I am unable to ping. Not really I cannot even ping the gateway though I have DHCP IP configuration from my local router. It means I should be at least able to talk to the gateway, right? The best part about this issue was, I was getting an IP address from my local network, even showing my local gateway IP. This blog will look at how I have fixed the bridged networking issues on my windows 10 laptop where my guest machine cannot talk to the local gateway and the internet. And we should be able to fix the issue unless, of course, if it is not a bug. One of the workarounds was to use the NAT adapter however, that’s not the actual solution to the issue. In those articles, some of the users mentioned that they could not get the WAN side of the firewall connect to the bridged network and bring it to the local network. We also took a look at how to install pfSense and Opnsense firewalls in the VMware workstation. In my previous blog, we talked about how you can configure port forwarding in the VMware workstation. I have built several labs with VMware workstation pro, and it does work perfectly fine. Mostly, I tend to believe that it is a bug on the software, and when your friends or colleagues tell you that they were able to fix the same issue, you would be like, oh really? I thought it was a bug. The most frustrating part of working with the virtual lab is that sometimes things don’t work the way you expected them.Īt times when I work with virtual network equipment in VMware workstation, most of the configuration works without any issues, however, certain features don’t work at all.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |